Extruders (Five Sets)

Screw and barrel of A, E layer (LDPE/LLDPE/mLLDPE)

• Total power of Barrel Heating: 4 zones, 21kW for 2 sets, with digital automatic temperature controller
• Main motor for extruder: 2 sets, with inverter (power: 37kW×2 sets)

Screw and barrel of B, D layer (EVA, ADHESIVE)

• Total power of Barrel Heating: 4 zones, 18kW×2 sets, with digital automatic temperature controller
• Main motor for extruder: 2 sets, with inverter (power: 22kW×2 sets)

Screw and barrel of C layer (PA, EVOH)

• Total power of Barrel Heating: 4 zones, 11kW×1set, with digital automatic temperature controller

Die head (A/B/C/D/E)

• Structure: five-layer plat stackable structure (pancake)
• Diameter of die lip: THREE (3) INSERTS 180 mm + 250 mm + 300 mm
• Gap of die lip: 1.5mm
• Heating power for die head: appr. 30kW
• Temperature control mode: thermocouple and imported dual-digital automatic temperature controller
• Material: 42CrMo, forging and heat treatment, material of die lip: 38CrMoAlA
• Channel of the die head: plating and polishing

Dual-Lip Air Ring

• Power of air blower: 11kW with Schneider AF speed control
• With heat exchange: 1 piece TWO INSERTS 180 MM + 250 MM

Winder Type: WSD-III  

• Two-station automatic winding
• Winding mode: surface, central, gap winding
• Tension control mode: fully automatic close-loop control
• Fitting for film thickness from 20µm – 200µm
• Max. diameter of the reel – 1000mm
• Max. linear speed – 60m/min
• Max. reel width – 1600mm
• Winding core – 3 inch + 6 inch core
• Dimension (l×b×h) – 5000×3000×2000mm
• Weight: 3500kg

Five-Layer Blown Film Line, model IMG – M5B-1700QA

  General Specification:

• Max. film width: Film max. Lay flat width: 1600mm
• Film thickness: 45 microns up to 200 micron
• Max. output: 230kg/h
• Total power: 260kW
• Line weight: approximately 42t
• Dimensions(L×W×H): 15000×8700×12500mm
• Raw materials: LDPE, LLDPE, mLLDPE, PA (middle layer)
• Film layer structure: A/B/C/D/E